集装箱通风口

更新:2021年6月24日|存储容器通风口

此网站包含产品的附属链接. We may receive a commission for purchases made through these links.

集装箱通风口

集装箱通风口

寻找有通风口的储物容器? check out this 存储 container that we built for a customer with two types of vents. Louvered vents on the sides and whirlybird vents on the roof.

This container modifications gives you the best air circulation inside the container and the best protection from 冷凝.

澳门百老汇娱乐官方网站的人 销售团队. 他们会给你最优惠的价格 & 解答所有集装箱通风问题.

集装箱通风口 are usually installed at manufactuering time to help with air flow inside the container, mainly to solve the problem of 水分 and 冷凝.

But these factory installed vents are really small and will not do a very good job especially if the container is an older container and is going to be used for 存储.

Mentioning old 容器 here because they do have only two small vents, 为20英尺的集装箱,每边各装一个. While the newer models have four to six vents on each side. We even start seeing vents on the front walls and the 货物 doors too.

现在除了管理存储容器的气流, These small shipping container vents designed to stop insects from getting inside the container too.

工厂安装通风口就到此为止. But they are not the only solution for the shipping container ventilation. 还有更好的选择.

集装箱基本通风口

集装箱百叶通风孔.

While basic shipping container vents are good enough for providing some protection for 货物 当集装箱在世界各地移动时.

They are not good at all if the shipping container is to be used for anything involve 存储.

Without proper ventilation of the shipping container. 容器将建立水分和 冷凝 这又会导致各种各样的问题.

One solution is a bigger louvered vent which allows better air flow. These shipping container louvered vents are about 12 inches by 12 inches. Which is the most common size used on shipping 容器.

Shipping container louvered vents are usually installed in pairs, On opposite sides. One vent on the top left panel and the other on the top right panel on opposite corners.

Some customers will like the vents installed on the same side. One louvered vent on the top corner and the second vent on the opposite bottom corner. 哪个能提供更好的空气循环. Cold air enter from the bottom vent and worm air exits from the top vent.

12X12 Inches louvered shipping container vents are the most commonly used size but not the only size available. Check out the image in this section for a 4 feet by 4 feet louvered vent.

集装箱通风口安装工具

如何安装集装箱百叶通风口

To start, The louvered vent we order comes as a kit. The aluminum vent is already installed inside a 2X2 inches steel tube, Some times we get them inside a 2X3 inches tubes which is a better fit if the container is to be insulated.

You can install just about any vent you like as long as you are willing to build the steel frame for it.

The installation of the louvered vents is really easy and it goes like this.

  • 1
    Trace the vent frame on the outside of the container.
  • 2
    用一个 磨床 用一个切断的车轮.
  • 3
    把通风孔周围的油漆磨掉.
  • 4
    Insert the vent in the opening and line it up flush with the wall panel.
  • 5
    焊接通风口框架所有的方式周围.
  • 6
    钢丝轮和内部密封(嵌缝).
  • 7
    遮盖铝排气口. 主要的 & 油漆.

The average time to install this type of shipping container vents is about two hours. 如果你最终买了一个没有框架的通风口. 帮自己个忙,为它做个架子.

Installing the louvered vent without the steel frame is a little faster and cheaper. But it will never look as good as in a frame and in the long run you will end up with water seeping inside. 外面的密封胶会失效

客户订单 澳门所有娱乐官方网站链接 通常要求安装百叶通风口.

航运集装箱旋风鸟通风口

Even though whirlybird vents were not designed for shipping 容器. Just like louvered vents they can be installed with ease, they do a good job in fighting 冷凝 and 水分.

自然界的蠕虫空气向上运动,冷空气向下运动. When the worm air from inside the container hits the turbine vents it causes it to start spinning which in turn start to generate vacuum underneath the vent which allow for more air to get exhausted form the container.

This circulation of air is what's needed to keep the shipping container dry without 水分 或冷凝.

Just like the louvered vent whirlybird or "Turbine Vents" comes with a flat mounting flange perfect for mountining on a flat surface. Unfortunately shipping 容器 roof are corrugated.

如何在波纹表面安装平法兰?

  • 1
    就是这样.
  • Start by fastening the vent flange to the high part of the corrugation and pound down the flange while working your way around. It's a thin flange and can be shaped to the corrugation with little pounding.

    This will be the fastest way to install a 集装箱旋翼式通风口. 但需要很多密封胶.

  • 2
    玻璃纤维的基础
  • You can purchase a whirlybird vent kit that comes with a fiberglass base that fits the corrugation. Which is not a bad way of doing it, but the kit is a little on the expensive side. And the roof have to be as good as it can be or the fiberglass base will not fit properly.

  • 3
    澳门百老汇娱乐官方网站做事的方式.
  • We take the time to build a steel frame for the whirlybird vent. 澳门百老汇娱乐官方网站在屋顶上开了一个方口, 把框架放在开口上, 焊接所有的周围, 清洁底漆和油漆.

    Then fasten the vent flang to the flat surface of the frame. This way takes a little more time but you don't have to worry about the corrugation, 或密封胶, 而且看起来好多了.

海运集装箱改装是澳门百老汇娱乐官方网站的工作

版权:©2021
澳门百老汇娱乐官方网站